Basic Information
| Raw material | PE powder |
| Extruder Capacity | 80-120 kg/h |
| Max PE profile size | 150×30 mm |
| Extrusion speed | 0.5-4 meters/min |
| Usage | PE Floor profile |
Product introduction
The wood-plastic floor extrusion line adopts the SJZ65/132 conical twin-screw extruder, which is specially used for the extrusion, plasticization and molding of PVC powder + wood powder raw materials. It has the characteristics of high output, good plasticizing effect and low energy consumption. The conical twin-screw is used to rotate outwards in opposite directions, and combined with the quantitative feeding screw to control the feeding speed, it can achieve the effect of uniform extrusion of raw materials.
At the same time, the entire production line can be equipped with Siemens, Delta and other brands of PLC automatic control systems according to customer requirements to realize the automated operation of the production line.
The shaping and cooling of the profile adopts the vacuum shaping and circulating water cooling system.
The vacuum pipe and the cooling water pipe are connected by copper live joints. While ensuring the degree of vacuum, the cooling effect can be guaranteed. The profile traction adopts the upper and lower flat block traction crawler mechanism, and can increase the heterogeneous traction rubber block to meet the traction of the profile, and will not squeeze the plate profile, thereby deforming the product.
Crawler lifting is controlled by air cylinder, which has the function of adjustable pressure, thus controlling the contact area and pressure of the crawler to the plate and profile.
The cutting machine adopts a knife-lifting cutting machine, which is controlled synchronously with the extrusion of the main machine, and has accurate cutting.
Machine List
| No. | Equipment name | Qty |
| 1. | Screw feeder | 1set |
| 2. | SJ-65/33 Single Screw Extruder | 1set |
| 3. | SJ-45/30 Single Screw Extruder | 1 set |
| 4. | Co-extrusion Mold | 1set |
| 5. | Vacuum calibration table | 1set |
| 6. | Haul-off machine | 1set |
| 7 | Cutter machine | 1set |
| 8 | Stacker | 1set |
Processing
1. Put the materials into the mixing unit
2. Put the mixing materials into the parallel twin screw extruder to composite(If the WPC floor is PVC-WPC, this step can be ignored)
3. Materials after treatment
4. Put the treated materials into the WPC floor profile extrusion line
5. WPC floor decking
6. Sanding,embossing,brushing (custom)
7. Final prodcts
Our company
Our company adheres to the tenet of quality-oriented and attitude-oriented, and continues to introduce peers and international advanced technology and management concepts on the basis of extending its own technology. Main products: construction template production equipment, foam board production line, stone plastic molding production line, plastic pipe production line, wood plastic production line, single-wall/double-wall corrugated pipe production line, profile/profile production line, plate/sheet production line, construction Formwork production line, waste plastic recycling and granulation production line, packing belt production line and grinder, high-speed mixer (group), crusher, knife grinder, shredder, tractor, winder, cutting machine and a series of plastic auxiliary mechanical. At the same time, the above-mentioned equipment with special specifications can be designed and manufactured according to the needs of customers for use and on-site installation. With advanced technology and value-for-money prices, the company makes its products sell well at home and abroad.
Product Tags:
|
|
PE Powder 4m/Min WPC Profile Extrusion Production Line Conical Twin Screw Images
|
